Lending basics · · 5 min read
Understanding HEM: the Household Expenditure Measure explained
Why lenders use a benchmark instead of your client's budget, and what to do when the numbers disagree.
When a client says "I spend about $2,200 a month on living costs", a lender does not simply write that number down. It also looks at a benchmark called HEM. If you work as a loan processor, you will see this word on almost every file.
This article explains what HEM is, why lenders use it, and what you should do about it at your desk. We use plain words and made-up examples.
What HEM is
HEM stands for the Household Expenditure Measure. It is a benchmark of what households in Australia typically spend on . Think of groceries, power and gas, phone and internet, clothing, transport, health and similar essentials.
The Melbourne Institute publishes HEM. The numbers come from large surveys of how Australian households spend their money. Lenders then use the benchmark as a guide when they check a loan application.
HEM is not one single number. It changes with:
- Household type. A single person, a couple, and a couple with children have different benchmarks.
- Number of dependants. More children usually means a higher benchmark.
- Income. Households with higher income tend to spend more, so the benchmark rises with income.
- Where the client lives. Costs differ between a big city and a small town.
So a couple with two children in a capital city will have a different HEM from a single person in a regional town. When you hear "the HEM", always ask: "For which household?"
What HEM is not
HEM is not a rule that tells the client how much to spend. It is not a measure of what one person actually spent last month. It also does not include the loan repayment, rent, or other debts. Those are counted separately.
HEM is also not the same as a lender's own policy. Each lender decides how to use it. The details below are common practice, but you must always follow the lender's current policy for the file in front of you.
How lenders use it
A lender must decide whether a client can afford a loan. To do that, it needs a number for living expenses. This is a core part of .
The problem is that clients often guess. Many people do not know what they spend on food, fuel and small bills each month. Some also feel that a low number will help them get approved. A benchmark gives the lender a reasonable check on that guess.
Lenders do not all use HEM in exactly the same way. Some use it as a floor. Some add a loading on top of it. Some compare it with other tools of their own. What stays the same is the idea: the lender wants a living cost figure that is realistic, not hopeful.
HEM vs declared expenses
The client "declares" their expenses on the application. That is the number the client says they spend. The lender then compares the declared number with the benchmark.
Most lenders use the higher of the two. If the declared number is above the benchmark, the lender will usually use the declared number. If the declared number is below the benchmark, the lender will usually use the benchmark.
Here is a made-up example. These numbers are only to show the idea. They are not real HEM figures.
| Case | Declared by client | Benchmark (example) | Used by the lender |
|---|---|---|---|
| A | $2,200 a month | $2,800 a month | $2,800 a month |
| B | $3,300 a month | $2,800 a month | $3,300 a month |
| C | $2,800 a month | $2,800 a month | $2,800 a month |
In case A, the client declared less than the benchmark, so the loan is assessed with the higher number. In case B, the client really does spend more than the benchmark, so the lender uses the client's number.
A low declared figure does not make a loan easier to approve. It makes the file look like nobody checked.
This gap matters. In case A, the lender assumes $600 more in costs every month than the client wrote down. That is $600 less money left to pay a loan. A change like this can lower the maximum amount the client can borrow, sometimes by a large amount. Your broker needs to know this early, so they can set the right expectations with the client.
A short word on "loading"
Some lenders add a percentage on top of the benchmark. This is called a loading. You will not usually set it yourself. It is part of the lender's policy and the CRM or the lender's calculator applies it. Your job is to enter the facts correctly.
What a processor does about it
You do not calculate HEM by hand. The lender's tool does that. But you have an important job before the numbers reach the lender. Here is a simple routine.
- Read the declared expenses. Check that every line has a number and that the household type is right: how many adults and how many children.
- Compare with the bank statements. Look at the real spending in the last few months. Group it into the same categories as the application. You are looking for gaps.
- Look for costs the client did not declare. Subscriptions, school fees, childcare, regular transfers to family, and buy-now-pay-later payments are often missed.
- Raise differences with the broker. If the statements show clearly higher spending than declared, tell the broker before the file goes to the lender. Write the reason on the file.
- Note it when the client is under the benchmark. If the declared number is much lower than HEM and the statements agree with the client, note that on the file. The broker can then explain to the client that the lender may still use the higher benchmark.
Be careful with your words
Never tell a client to change a number so the file passes. Your job is to record what is true and to point out what does not match. If a number looks wrong, ask the broker. If the client agrees that the number is wrong, the broker can update the application with the correct figure and evidence.
Common mistakes
New processors often make the same few mistakes with expenses. Here are the main ones.
- Copying the benchmark into the declared field. The declared field is for what the client says. The benchmark is a separate check.
- Forgetting dependants. One missing child can change the household type, and therefore the benchmark.
- Mixing debts and living costs. Credit card and loan repayments belong in the debts section. Putting them in living costs counts them twice, or hides them.
- Using old statements. A statement from a year ago may not show the client's present spending.
- Ignoring one-off items. A single large purchase is not a monthly cost. Do not average it in without asking the broker.
Practise this
HEM is easier to understand when you work with a file. In the Burphy course you will meet it in a lesson on expenses, and then practise on a made-up client in the training CRM. All people and accounts in the course are fictional.
Next time you see "HEM" on a file, remember three questions. Which household is it for? What did the client declare? What do the bank statements show?
Key takeaways
- HEM is a benchmark for basic living costs. It changes with household type, income and place.
- Lenders usually assess the higher number: what the client declares, or the HEM benchmark.
- A low declared figure does not make a loan easier to approve. It can make the file look unchecked.
- Always compare declared expenses with the bank statements before the file moves on.
- All dollar amounts in this article are made-up examples. They are not real HEM figures.
PLACEHOLDER: Sample article for layout. Mentor to review for accuracy before publishing.